Thursday, November 19, 2009

How to Make Printed All-Purpose Totes!

After reading this, and this book I have been absolutely itching to get my hands on some printing projects.  It really didn’t matter what I printed.  Walls, cards, clothes, bags….I just wanted to print something!!!  I have several printing projects lined up and decided to start with some simple freezer paper stencil printing…except I used contact paper!  Contact paper was something I had on hand…it removes a step (ironing)…and had the same effect as freezer paper. 

Fall 740

I plan on doing several holiday projects using a few different printing methods with the kiddos (or at least one of the kiddos…the other will help by taking a nap…how do you print with a 1 year old that seems to have 5 hands and ridiculous speed?!)    but this project came out of the studio made just by Mama. All-purpose totes became a wonderful canvas for a very fun and satisfying introduction to printing.  Whether these are used (by whoever is getting them for Christmas!) for groceries, bits of nature, or inside storage they are just lovely.  Oh, I do love to make pretty things!!!

So here you have it:

How to Make All-Purpose Printed Totes

1.  From 45” wide fabric cut 2 2” strips and one large piece ~20” wide.  All pieces are cut against the grain. 

Fall 642

         Fall 643

2.  Sew the 2” strips into a long tube to make the handles by folding them in half width wise…stitching using a 1/4” seam allowance…turn…press. 

3.   On each of the short sides of the large fabric piece fold and press a 2” hem.  Stitch close to the pressed edge. This will be the bags top edge.Fall 644

4.   Sew the side seams of the bag using french seams:  With wrong sides together stitch the side seams with an 1/4” seam allowance. Fall 645

Turn.  Press.  Now with right sides together sew the same side seams with a slightly larger seam allowance ~1/2”.  Fall 646

Now the raw edges of the side seams are completely encased leaving very polished seams.  Turn.  Press.

Fall 648

5.   Press the bottom of the bag open so the bottom corner makes a triangle.  Make sure to line up the side seam and the middle of the bottom carefully.  Measure ~2 1/2” from the corner and stitch perpendicular to the side seam to make a triangle.Fall 650

  *Note* In the image I measured 3 1/2” but decided that wasn’t the right proportion for the bag so started again with 2 1/2”. You’ll have to decide what measurement will give you the bag dimensions you’d like.  Repeat on the other side.  This will make a bottom for the bag.  Press.Fall 652Fall 653

6.   Stitch the triangle to the bottom of the bag. 

Fall 654

7.   Determine how long you would like the handles and trim off the excess.  Place them on the bag where desired and pin.  Stitch them in place securely. 

Fall 656

8.   Voila!!!  You now have a simple and very practical bag…and better yet…a canvas for printing.

Fall 658

9.   Draw or transfer the design that you would like to print onto the contact paper.  Remember that the sticky part is on the front…so pay attention to how you orient your design to assure it is going to face the right direction.  

10.   Cut out your design carefully with an exact-o knife or scissors.  Peel off the back and place it where desired on the bag.  Press it down carefully, especially at the edges to ensure no paint will find its way under the contact paper.

11.   Place several layers of newspaper inside the bag underneath the area that you will be printing.

12.   With your chosen acrylic paint or fabric paint, and with a stencil brush, begin to paint your design.  When applying paint make sure to use the dry brush technique and to apply many successive thin coats rather than one or two heavy coats of paint.

        *Dry brush technique:   Put a small amount of paint on your stencil brush.  Dab much of the paint off on a rag so brush seems “dry” and paint is applied very lightly. 

        * If paint is applied to thickly than it will saturate the fabric, soaking through to the back and make a bit of a mess, and not look very polished. 

Fall 738

Fall 736

13.   When your print is saturated with color carefully peel off the contact paper.  Stand back and admire…it looks great!!! 

Fall 739

Fall 746

14.   Recognizing that you have been bitten by the printing bug start planning more projects that use this and many other printing techniques.  Pish-posh N1H1…this is much more contagious and much more fun!!!  Fall 748

Happy printing friends!

5 comments:

Maribeth said...

Hannah, These are just lovely! You are inspiring me! I have Lena Corwin's book, and sometimes look through it at night before bed. But, I haven't taken the projects into my creative time during the day. Maybe it's time.

Heather said...

Hannah, wow! What a tutorial. I have just bought a book on printing, and I have been itching myself to get my hands on this new art. Thank you so much for sharing.

BTW, did you get my email yesterday? Just want to be sure :)

quirkygranolagirl said...

Those designs are really lovely. Thank you for sharing.

Stacey Kirby said...

Hi Hannah! Thanks for the instructions, this will be the perfect cure for my collection of incredibly boring tshirts. I've been meaning to get to them for ages, but I wasn't sure how I wanted to approach the project. Very cool!

Jack said...

promotional bags

I have searched the Internet for five hours .This is first articel which is shape my heart.The independance are always the topic in recently.“This article actually answered my problem, thanks a lot!”

Post a Comment

Comments really mean a lot to me and I love to read each and every one. If you have a specific question about anything please feel free to email me and I will reply personally.